10 Best

Wireless Guitar Systems

of June 2023

Wireless guitar systems are the current rage among guitarists. You can finally say goodbye to those pesky cables and all the problems when getting tangled in all those wires. Wireless guitar systems are not only reliable and convenient, but they take your performance to a whole new level. You may be convinced of their effectiveness, but there can be several doubts when it comes to choosing one. The sheer number of products on the market and the multitude of features can complicate your decision. This buying guide will help you separate the wheat from the chaff, and advise you in choosing the best wireless guitar system for your needs.

What is a wireless guitar system?

This is an electronic device that replaces your guitar cable. Using a wireless guitar system would allow you to connect your guitar to your amplifier without using a cable. A wireless guitar system has a transmitter and a receiver. A transmitter is connected to the guitar, which converts the analog signal into a digital signal that is later transmitted to the receiver. The receiver then decodes the information and sends it to the amp in analog form.

What are the advantages of using a wireless guitar system?

The following are some advantages of using a wireless guitar system:

• Maneuverability: As you walk around, you don't have to worry about accidentally pulling out your cable. Plus, your setup will remain neater. This is perfect for use on stage as well as in your practice sessions.
• Greater Performance: The constant worries of tripping over a cable, pulling it from the pedalboard, tangling it up will be a thing of the past, and you will enjoy performing live in a much more natural way.
• Better Sound Quality: Because of the tone loss associated with long cables, wireless guitar systems can actually sound better.  

What are the things to consider when buying a wireless guitar system?

Listed below are a few things to consider when choosing a wireless guitar system:

• Reliability: While performing live, you need to be sure that your instrument won't randomly cut out due to signal interference. It is absolutely vital to have a reliable wireless guitar system with excellent signal strength with no drop outs. 
• Durability: Typically the transmitter is more susceptible to breaking. Consider a wireless guitar system built with a metal transmitter to withstand the vigorous conditions of traveling. It is crucial that a wireless system has a durable transmitter that does not have flimsy battery cases or falls off your strap. 
• Tonality: While wireless guitar systems have greatly improved in terms of tone, it is crucial to use a wireless guitar system with equal sound tone as a high-quality cable, without any distortion or buzz. 
• Range: Check that the unit's range is sufficient so that it can provide you with a strong signal without a problem. It's important to have a unit with a good range so that you are able to move freely on stage.
• Battery: It will be a good idea to buy a model with decent battery life. Look for a unit that can last according to your needs.

How to maintain your wireless guitar system?

Here are some tips on how to properly use your wireless guitar system:

• Battery: Consult the user manual of your wireless system to determine what kind of battery is recommended. For best results, use new, high-quality alkaline batteries. However, if you are using rechargeable batteries, make sure they are fully charged before usage and have a wide range of performance.
• Keep a clear line of sight: Ideally, there should be a clear line of sight between transmitters and receivers. . Any obstacles in the way of the signal, such as people, metal objects, or walls, can cause interference or dropouts.
• Selecting the best channel: Use the auto-scan function on your wireless system to automatically select the best channel for your network.
• Avoid signal interference: Maintain a distance of at least 10 feet between multiple 2.4 GHz wireless systems to prevent signal interference. 
• How to connect the power: Pedalboard wireless receivers should be connected to the pedalboard power supply rather than the one included with your system. If it uses a third-party power source, it must match the receiver's voltage, polarity and amperage.

There are several types of wireless guitar systems in the market. Determine your requirements and then select one of the following varieties:

• VHF systems: They utilize the same frequencies as our old radio and TV sets. They are relatively cheaper but are also more susceptible to interference.

• UHF systems: These are reliable and more common nowadays. They utilize shorter wavelengths that are not used commonly by other electronic devices. This makes them less prone to interference.

• Digital Wireless Systems: These are the most efficient and reliable systems. They run on the same frequencies as Wi-Fi routers. They are totally free from interference. Many of these smart systems can automatically detect the ideal frequency for transmission. However, they are more expensive than analog systems.

• Warranty: Almost all users insist on a reliable manufacturer’s warranty. If you are investing a substantial amount on a product, the least you could expect is a warranty that covers repairs and maintenance for the initial years after your purchase.

• Ease of use: Any wireless guitar system that you select should be easy to use. After going through thousands of wireless guitar system reviews, we recommend that a clear user interface and a detailed user manual with clear instructions are some of the things that you should be looking for.

• Consider the shape: The shape and size of the equipment should meet your requirements. Larger units that can be mounted on racks are more suitable if you own a roadie or rack gear. Compact systems are more suitable if you plan to keep it on your pedal board. 

• Check the transmission range: This refers to the size of the area around the receiver within which you can move conveniently without disturbing the signals. The higher the transmission range of your system, the more freedom you have to move around the venue. If you perform at larger venues or outdoors, it will be to your advantage to opt for a system with a longer transmission range.

• Ensure that the batteries are reliable: You need reliable batteries that can last through a concert. Non-rechargeable alkaline batteries give you the maximum time on stage and should be preferred over nickel-cadmium batteries. Lithium-ion batteries are also a good option.

• Battery packs and power indicators: Most quality wireless guitar systems come with rechargeable battery packs that are a must. A battery gauge and a remote battery indicator are some additional features that you may like to have. You should check battery life according to the kind of batteries that the transmitter accommodates.

• Check the signal to noise ratio: All wireless guitar systems produce low levels of interference or noise. By reading reviews and customer feedback, you can find out about the level of interference produced by the system you are planning to buy.

• Opt for automatic frequency selection: When you turn on this feature, your device automatically locates and connects to the nearest channel that is transmitting clear signals.

• Check the frequency response: This feature allows you to switch between low to high frequencies, according to your requirements.

• Check for an interface lock: This feature allows you to lock a particular setting on the backpack. This prevents any accidental changes in settings—for example, accidentally turning off the microphone in the middle of playing.

Audio-Technica was established in 1962. Audio-Technica Group is devoted to designing and manufacturing the best-in-its-class audio equipment. They offer a range of products that are hugely popular with musicians and music lovers all over the world.

XVive is a well-known name in this market. They offer quality and reliability at affordable prices.

Shure was established in 1925. Shure is a market leader in the field of audio equipment. Their range of products combines cutting-edge technology with the best design.